
Sound Renovation fabricates and installs metal roofing in New Canaan, CT. We form our own standing seam panels, custom metal flashing, and trim from Drexel Metals stock in our shop. Brothers Adam and Paul Mocciola run every job, starting with drone imagery and an in-person estimate. You get the panel profile, finish, and price in writing before we cut a single sheet.
Metal Roofing & Fabrication In New Canaan, CT
Panels, Flashing, And Trim Bent In Our Own Shop To Match Your Exact RooflineDrexel Metals Systems Formed In-House And Installed By The Same Two Owners
A metal roof is a decision you make once and live with for decades. That’s why metal roofing and fabrication in New Canaan, CT rewards a crew that shapes its own metal instead of forcing stock parts to fit.
At Sound Renovation, we run our own sheet metal shop. Standing seam panels, valleys, drip edges, and trim get formed to your roof’s actual measurements. Family-run since 2001, we start with a drone reading of your whole roof, then meet you at the house to walk through the plan.
You’ll understand your profile options, your finish, and your final number before fabrication begins. That’s premium quality at a practical price, and it’s how Sound Renovation has worked across the area for over two decades.
How Sound Renovation Fabricates And Installs A Metal Roof In New Canaan, CT
Every custom metal roofing project in New Canaan, CT follows the same order, so the metal we form in the shop lines up exactly with the roof it lands on.

Drone Reading And Field Measurement
We fly a drone over your home and capture sharp imagery of the entire roof. The footage shows us pitch, ridge lengths, and the tricky spots around chimneys and skylights. We take those numbers back to the shop so we cut panels once and cut right. This step keeps guesswork off the roof and out of your estimate.
Custom Panel And Flashing Fabrication
We form your panels, flashing, and trim from Drexel Metals stock inside our own shop. Cutting and folding to your measurements means seams fall where they should and edges wrap clean. Fabricating in-house lets the metal match your roofline instead of the other way around.
Deck Prep And Underlayment
Before we install any metal, we strip the old roof and inspect the wood decking underneath. We show you any rotted or soft spots and replace them before we cover them. Then we lay underlayment sized for a metal system. A sound deck and the right underlayment are what let a metal roof seal and last.
Panel Set And Daily Cleanup
We install each panel using its system’s best practices, locking the seams and fastening to spec. Standing seam panels hide their fasteners, so nothing bleeds or backs out down the road. We clean the work area at the end of every day, magnets included. You get a tidy site while the job runs and a finished roof that’s flashed tight at every edge.
Metal Roofing Choices To Settle Before Your Project
A few decisions shape how your metal roof looks from the street and how it handles New Canaan weather. Here’s what to think through.

Choosing Your Panel Profile
Standing seam gives you clean vertical lines and hidden fasteners, a strong fit for classic and modern homes alike. Architectural profiles offer a different texture and shadow line. We fabricate both from Drexel Metals stock, so your choice drives the panels we form, not what happens to be in a warehouse.
Selecting Color And Coating
Color and coating decide how your roof reads from the curb and how it stands up to UV and weather over the years. Darker tones suit some rooflines; lighter finishes reflect more heat. We walk you through the coating options on Drexel Metals stock so the finish holds its look for the long haul.
Planning Custom Flashing And Trim
Valleys, chimneys, skylights, and roof edges are where metal roofs succeed or fail. We form custom metal flashing and trim for each of those details in our shop, cut to your roof’s real angles. Tight, purpose-bent flashing keeps wind-driven water out where generic parts leave gaps.
Why Choose Sound Renovation For Metal Roofing & Fabrication In New Canaan
Here’s who does the work on your metal roof and how we run the shop behind it.
- Two Owners On The Job, Start To Finish: Adam and Paul Mocciola are brothers, and they work side by side on every project. One of them is at your home for the drone reading, the estimate, and the install. You always know who’s accountable.
- A Shop That Bends Its Own Metal: We’ve fabricated our own panels, flashing, and trim in-house since 2001. Most roofers order metal in and install what shows up. Running our own shop means your standing seam fabrication matches your exact roofline.
- The Best Around, Not The Biggest: We stay small on purpose, so both owners can keep hands on every job. That’s the Sound Way. We’d rather do fewer roofs to a higher standard than chase volume.
- Built On Referrals, Not Advertising. Homeowners and property boards across Fairfield County keep sending us neighbors. We don’t advertise for growth. Our reputation for craftsmanship and follow-through does that work for us.
- Every Call And Email Answered. No message goes unreturned at Sound Renovation. We keep you informed through fabrication and install, and we’re still reachable long after the last panel is set.
What Homeowners Say About Sound Renovation
Homeowners, boards, and associations across the area have shared what it’s like to work with Sound Renovation. Read their words in their own reviews below.
Sound Renovation Stands Out Among The Very Best Contractors We Have Worked With
Adam And His Team Were Amazing To Work With
I Liked That They Actually Got Back To Me In A Timely Manner After I Called
Metal Roofing & Fabrication FAQs For New Canaan, CT
Clear answers to what homeowners ask us before starting a metal roof.
Do you fabricate your own metal or buy it prefinished?
A: We fabricate our own panels, flashing, and trim in-house from Drexel Metals stock. Our shop cuts and folds each piece to your roof’s real measurements. That’s why fabrication matters as much as the panels: we form your metal for your home, not pull it off a shelf.
Do you serve areas beyond New Canaan, CT for metal roofing and fabrication?
A: Yes, we fabricate and install metal roofing across Fairfield County, CT, including the surrounding towns. You can view our full coverage on the areas we serve page. Both owners work jobs throughout the region.
How long does a metal roof installation take?
A: Most metal roofs take longer than asphalt because the panels and flashing are fabricated to fit and set with tight tolerances. The exact timeline depends on your roof’s size and how many custom details it has. We’ll give you a schedule at the estimate and keep you posted as the work runs.
What determines the price of a metal roof in New Canaan, CT?
A: Price comes down to your roof’s size and pitch, the panel profile and finish you choose, and the condition of the decking underneath. Custom flashing around chimneys, valleys, and skylights also factors in. You see your profile, finish, and final price in writing before we cut any metal.
What happens if the crew finds bad decking during tear-off?
A: We show you the damaged wood and explain the repair before we cover it. Metal roofs need a sound deck to seal and hold, so replacing soft or rotted boards isn’t optional. You’ll know about any decking work as we find it, not after the fact.
What kind of metal roof do you install?
A: We install and fabricate standing seam and architectural metal roofing systems. Standing seam is the most popular choice for homes because of its clean lines and hidden fasteners. We’ll help you match the profile to your home’s style during the in-person estimate.
Why fly a drone before quoting my metal roof?
A: The drone gives us accurate imagery of your whole roof before we quote a number. It captures ridges, valleys, and the areas around chimneys and skylights that aren’t safe to measure from a ladder. Those measurements go straight to the shop so panels are fabricated to fit the first time.
Start Your Exterior Services Project Today!
Ready to schedule your roofing, siding, window, door, or metal fabrication service? At Sound Renovation, you’ll find a team of seasoned pros who put quality first. With direct owner oversight on every project, you always know where to turn and who to trust.

